Specify the space.
Understand every layer.

A tactile natural-aggregate surface connecting arrival, circulation and outdoor living.

Application: Outdoor. Walkways, Driveways, Outdoor dining, Terraces, Parking areas: assess loads.

Substrate: Sound concrete or suitable bonded cementitious screed. Minimum 28-day cure; confirm strength, moisture, adhesion and preparation. Concrete and any approved cementitious screed: minimum 25 MPa compressive strength; structural design must suit the loads.

1. Concrete / suitable screed — Provides the load-bearing foundation and falls.
2. INCISE Epoxy Primer — Adhesion layer; confirm broadcast and application specification.
3. INCISE Terrace exposed aggregate — Natural exposed aggregate wearing layer. Reference detail shows approximately 8 mm; confirm project thickness and aggregate grading.
4. INCISE Ultra Guard — Specified protective sealer; confirm exterior and traffic requirements.

Refined tonal movement for spaces that need visual continuity and an architectural finish.

Application: Indoor; confirm exterior specification. Homes, Hotels, Retail, Offices, Bathrooms: specified wet-area system.

Substrate: Sound concrete or suitable bonded cementitious screed. Minimum 28-day cure; confirm strength, moisture, adhesion and preparation. Concrete and any approved cementitious screed: minimum 25 MPa compressive strength; structural design must suit the loads.

1. Concrete / suitable screed — Stable prepared substrate; repairs completed before coating.
2. Specified INCISE floor primer — Epoxy Primer with specified broadcast; assess Primer ST only where approved.
3. INCISE Microtopping Basecoat (BC) — Foundation coat; reinforcement where specified.
4. INCISE Microtopping High Density (HD) — Intermediate coat in the confirmed Microtopping build-up.
5. INCISE Microtopping Finish Coat (FC) — Decorative finish; optional additional FC for the approved aesthetic.
6. INCISE UltraGuard / INCISE PU WB Sealer / INCISE RapidShield — Select one protective sealer for the approved exposure, traffic and finish. These are alternatives, not three consecutive coats.

Continuous colour and fine mineral texture for living spaces, kitchens and carefully detailed wet areas.

Application: Indoor / specified wall environments. Bathrooms, Kitchens, Hotels, Feature walls.

Substrate: Sound, properly skimmed cementitious wall surfaces. Cure new cement plaster for at least 28 days; assess boards as a complete supported system.

1. Prepared wall / approved board assembly — Stable substrate, joints and corners detailed for the system.
2. Specified wall preparation / primer — Select for substrate and wet or dry exposure; WB Primer is not assumed over every membrane.
3. INCISE Microtopping base / intermediate coats — Confirm the wall-specific build-up and any reinforcement.
4. INCISE Microtopping Finish Coat — Creates the approved colour, texture and tonal movement.
5. INCISE WB Sealer / INCISE UltraGuard / INCISE PU WB Sealer / INCISE RapidShield — Select one compatible sealer. WB Sealer is primarily for decorative walls; confirm PU WB Sealer, UltraGuard or RapidShield for the intended conditions. Wet-area suitability is system-specific.

Durable mineral character for floors that connect indoor rooms with outdoor living.

Application: Indoor and outdoor. Homes, Verandahs, Walkways, Patios, Rooftops: detailed system.

Substrate: Sound concrete or suitable bonded cementitious screed. Minimum 28-day cure; confirm strength, moisture, adhesion and preparation. Concrete and any approved cementitious screed: minimum 25 MPa compressive strength; structural design must suit the loads.

1. Concrete / suitable screed — Sound foundation with falls where required.
2. Specified INCISE bonding primer — Confirm the current Microtek primer and broadcast requirements.
3. INCISE Microtek coat build-up — Mineral wearing finish; number of coats and thickness require technical confirmation.
4. INCISE UltraGuard / INCISE PU WB Sealer / INCISE RapidShield — Select one protective sealer for the approved exposure, traffic and finish. These are alternatives, not three consecutive coats.

An expressive outdoor floor with texture and stencil possibilities for spaces made to be enjoyed.

Application: Outdoor. Patios, Verandahs, Pool surrounds, Splash aprons, Rooftops.

Substrate: Sound concrete or suitable bonded cementitious screed. Minimum 28-day cure; confirm strength, moisture, adhesion and preparation. Concrete and any approved cementitious screed: minimum 25 MPa compressive strength; structural design must suit the loads.

1. Prepared concrete / screed — Foundation with falls and drainage.
2. Specified primer / bonding preparation — Confirm Patio-specific adhesion preparation.
3. INCISE Patio textured finish — Apply the approved texture or stencil design.
4. INCISE UltraGuard / INCISE PU WB Sealer / INCISE RapidShield — Select one protective sealer for the approved exposure, traffic and finish. These are alternatives, not three consecutive coats.

Colour and wear resistance integrated into fresh concrete, with smooth or textured finishes for practical budgets.

Application: Indoor and outdoor. Homes, Commercial floors, Industrial floors: assess duty, Driveways, Stamped concrete.

Substrate: Freshly placed, suitably designed concrete. This dry-shake system is not applied as a coating onto a 28-day cured slab. Concrete and any approved cementitious screed: minimum 25 MPa compressive strength; structural design must suit the loads.

1. Fresh concrete · design strength ≥25 MPa — Fresh placement, slab design and finishing window coordinated by the contractor.
2. INCISE Colour Hardener — Dry-shake hardener worked into the fresh surface; not a separate bonded topping.
3. INCISE Strong densifier — Densification treatment after hardener application, at the approved stage of curing. Penetrates the mineral surface; not a thick film.
4. INCISE UltraGuard / INCISE PU WB Sealer / INCISE RapidShield — Select the compatible sealer and confirm sequencing after densification and curing.

The INCISE material system for patterned concrete, installed by appropriately trained applicators.

Application: Outdoor. Driveways, Courtyards, Walkways, Outdoor dining.

Substrate: Newly placed concrete suitable for stamping; structural slab and base designed for the intended loads. Concrete and any approved cementitious screed: minimum 25 MPa compressive strength; structural design must suit the loads.

1. Fresh concrete slab — Foundation and wearing concrete shaped to falls.
2. INCISE Colour Hardener — Worked into the fresh concrete surface.
3. Release agent + stamp process — Application-stage operation, not a permanent standalone structural layer.
4. INCISE UltraGuard / INCISE PU WB Sealer / INCISE RapidShield — Select one protective sealer for the approved exposure, traffic and finish. These are alternatives, not three consecutive coats.

A smooth industrial mineral floor, power-floated to reveal natural concrete patterning. Available in natural concrete tones and the INCISE colour range.

Application: Indoor; confirm exterior specification. Hotels, Offices, Warehouses: assess loads, Commercial interiors, Homes.

Substrate: Existing sound concrete prepared for bonding. Confirm strength, age, moisture and contamination; assess any screed separately. Concrete and any approved cementitious screed: minimum 25 MPa compressive strength; structural design must suit the loads. Minimum 28-day cure before coating; confirm moisture and preparation.

1. Prepared concrete / approved screed · ≥25 MPa — Cured at least 28 days; mechanically prepare and verify moisture and integrity.
2. INCISE Epoxy Primer — Specified bonding layer and broadcast preparation.
3. INCISE Topcrete · coat 1 — First mineral coat in the approved two-coat build-up.
4. INCISE Topcrete · coat 2 — Second coat, finished with a power floating machine to the approved smooth appearance.
5. INCISE Strong densifier — Penetrating densification treatment; confirm timing and compatibility.
6. INCISE UltraGuard / INCISE PU WB Sealer / INCISE RapidShield — Select one compatible protective sealer for the project duty.

A continuous mineral finish shaping the colour and atmosphere of the water.

Application: Swimming pool interiors. Pool floors, Pool walls, Formed steps, Residential pools, Hospitality pools.

Substrate: Engineered sound pool shell with approved render, waterproofing and detailing as required. Confirm shell cure and moisture criteria separately. Concrete and any approved cementitious screed: minimum 25 MPa compressive strength; structural design must suit the loads.

1. Prepared pool substrate · concrete ≥25 MPa — Engineered shell and any approved screed/render. Minimum 28-day cure for cementitious concrete/screed before coating; confirm pool-specific moisture criteria.
2. INCISE Concrete Sealer — Preparation/bonding treatment in the pool build-up supplied by INCISE.
3. INCISE Aqua Pearl — Continuous swimming pool microcement finish.
4. INCISE UltraGuard / INCISE RapidShield — Choose the approved variant for the complete pool system. Confirm continuous-immersion suitability, cure-to-fill time and water-chemistry requirements.

A premium beaded surface with depth and visible aggregate character beneath the water.

Application: Swimming pool interiors. Pool floors, Pool walls, Formed steps, Hotel pools, Private pools.

Substrate: Engineered pool shell and approved pool preparation assembly. Substrate acceptance and waterproofing must be confirmed for this system. Concrete and any approved cementitious screed: minimum 25 MPa compressive strength; structural design must suit the loads.

1. Prepared pool substrate · concrete ≥25 MPa — Engineered shell and any approved screed/render. Minimum 28-day cure for cementitious concrete/screed before coating; confirm pool-specific moisture criteria.
2. INCISE Concrete Sealer — Preparation/bonding treatment in the pool build-up supplied by INCISE.
3. INCISE Beadcrete — Seabeads decorative pool finish; develop the approved bead exposure.
4. INCISE UltraGuard / INCISE RapidShield — Choose the approved variant for the complete pool system. Confirm continuous-immersion suitability, cure-to-fill time and water-chemistry requirements.

Rich natural tones and hand-finished texture for statement walls indoors and outside.

Application: Indoor and outdoor. Living rooms, Feature walls, Hotels, Exterior walls.

Substrate: Sound, correctly skimmed cement plaster or masonry surface. New cement plaster: minimum 28-day cure; confirm dry, stable condition.

1. Prepared wall substrate — Skim, repair and prepare to an approved finish.
2. Specified wall preparation — Confirm INCISE WB Primer or the product-specific preparation route.
3. INCISE Wallcrete — Decorative coat build-up and texture as approved.
4. INCISE WB Sealer / INCISE UltraGuard / INCISE PU WB Sealer / INCISE RapidShield — Select one compatible sealer. WB Sealer is primarily for decorative walls; confirm PU WB Sealer, UltraGuard or RapidShield for the intended conditions. Wet-area suitability is system-specific.

Natural colour and varied texture for architectural walls with a tactile presence.

Application: Indoor and outdoor. Homes, Hospitality, Interior walls, Exterior walls.

Substrate: Sound, correctly skimmed cement plaster or masonry surface. New cement plaster: minimum 28-day cure; confirm dry, stable condition.

1. Prepared wall substrate — Skim, repair and prepare to an approved finish.
2. Specified wall preparation — Confirm INCISE WB Primer or the product-specific preparation route.
3. INCISE Cemwash — Decorative coat build-up and texture as approved.
4. INCISE WB Sealer / INCISE UltraGuard / INCISE PU WB Sealer / INCISE RapidShield — Select one compatible sealer. WB Sealer is primarily for decorative walls; confirm PU WB Sealer, UltraGuard or RapidShield for the intended conditions. Wet-area suitability is system-specific.

Light-responsive decorative texture, from rustic depth to refined modern accents.

Application: Indoor / specified wall environments. Restaurants, Hotels, Homes, Apartment common areas.

Substrate: Sound, correctly skimmed cement plaster or masonry surface. New cement plaster: minimum 28-day cure; confirm dry, stable condition.

1. Prepared wall substrate — Skim, repair and prepare to an approved finish.
2. INCISE Metallic Primer — Metallic-specific preparation.
3. INCISE Metallic — Decorative coat build-up and texture as approved.
4. INCISE WB Sealer / INCISE UltraGuard / INCISE PU WB Sealer / INCISE RapidShield — Select one compatible sealer. WB Sealer is primarily for decorative walls; confirm PU WB Sealer, UltraGuard or RapidShield for the intended conditions. Wet-area suitability is system-specific.

A ready-to-use protective coating for heat control and water repellency on suitable building surfaces.

Application: Indoor and outdoor. Roof tiles, Plastered walls, Suitable roofing, Thatch: specialist assessment.

Substrate: Sound, clean, compatible substrate. Preparation varies between plaster, tiles, roofing and thatch; no universal primer or cure rule applies.

1. Suitable roof / wall substrate — Repair leaks, loose areas and failed existing coatings first.
2. Substrate-specific preparation / basecoat — Confirm compatibility and required treatment, particularly for thatch.
3. INCISE ThermoShield — Specified coat build-up for reflective surface protection.